The intake runners are different right/left. Also, the air distributor is different depending on the case. The case changed slightly with the 2.l reqiuring a different distributor. Most factory rebuild 1.9 got the later case and reqiures the later air distributor.

Dennis

----- Original Message -----
From: Jonce Fancher <streetbugs@WHISPLLC.COM>
Date: Monday, July 24, 2006 7:13 am
Subject: Re: Hesitation - temp 2 FIX Done Revise - Computer Resetting?

> I needed to use it due to after the motor build for some reason
> the intake runner from the air distributor to the head bound up
> when all bolted together, it
> wouldnt allow the intake runner to mate well to the head and
> stayed cocked. so i used the matabo or 6" Cut off disc grinder and
> removed 1/8" or the runner
> tubing that hides under the runner boots. chamfered and cleaned
> everything up and it slips in and fits perfect with a good seal at
> the head. this would
> explain why when i got the van it was never bolted down on the
> center air distributor. got run c-ya Jonce
> what is a mattababy?? c-ya Jonce
>
>
>
> 2) intake leak at the head to the runner! basic fit issues
> resolved with a matabo.
>
> What's a matabo? Is it something like a mattababy?
>
>
>
>
> --
> John Bange
> '90 Vanagon - "Geldsauger"
>
>
> Jonce Fancher
>
> 56 Single Cab
> 66 Sunroof Bug
> 66 Variant Squareback
> 66 Porsche 912
> 71 Sunroof Bus
> 84 Vanagon "Gottfried"
> 85 Vanagon Westi
> 2003 10 Passenger Sprinter
>
> Fancher's Upholstery Inc. -  www.fanchers.com
> Not-A-VW Club- http://mywebpages.comcast.net/jaransont3/notavwclub/
>