

| Subject: | Re: Replaced evil Temp2 |
| From: | David Bohannan |
| Date: | Fri, 25 Aug 2006 14:40:56 -0400 |
First day, temp2 seems to have fixed the problem... One question though...and this would make some sense... On cold start it takes only 2 turns and the engine starts...On warm/hot start now it only takes 3-4 turns. Is this "normal" based on a "cold program" and a "warm/hot program" in the ECU? I would think they would act differently... Or do I still have problems maybe with something else affecting the starting...otherwise I would consider it solved... Thanks! Dave 85 GL "Baby Bus" 85 "Goldy" On 8/24/06, David Bohannan <fjazzbass@gmail.com> wrote: > > Hey Volks, > > I just replaced my rather forgiving Temp2 sensor on my 85...I have yet to > see if it cures my problem, but it won't take long for me to figure it > out... > > The symptom was hot start, much crank, then finally catch after turning > over like 15 times or so...when cold it started up just fine...The biggest > thing that pushed me over the edge was being at the airport this AM and it > not wanting to start until I hit the accelerator a bit (to give it some > "air"...) > > In any case, old one came out real easy, clip came out with small > screwdriver, then 19 mm wrench and a small amount of coolant... > > I'll post my results...good or bad... > > -- > Dave - KC9FYM > http://fjazzbass.blogspot.com > -- Dave - KC9FYM http://fjazzbass.blogspot.com
Have something to add on this topic today? Revive this thread in the forum »