IIRC, the rubber gasket goes on first, the round peice with the pear shape
hole in it which screws to the vent from the fridge and pulls it tight to
the van sheet metal, then the round metal late with the smal hole that is
slightly off center goes on, then the outer peice goes on.  I don't think it
would go together wrong.

>From: Mike Miller <mwmiller@CWNET.COM>
>Reply-To: Mike Miller <mwmiller@CWNET.COM>
>To: vanagon@GERRY.VANAGON.COM
>Subject: Frig fixed but...
>Date: Fri, 25 Aug 2006 15:05:38 -0700
>
>Frigid vanners,
>
>I replaced the thermocouple on my frig and it now stays lit. Well for an
>hour at least.
>
>Next question:
>
>I have the exterior cover, a metal plate with screw holes in it, a rubber
>gasket that matches the holes in the plate and cover, a metal plate with no
>screw holes in it just on hole for the exhaust I think.
>
>I believe that the exterior cover, metal plate with screw holes in it and
>gasket go on the outside of the van in that order outer to inner.
>
>Where does the metal plate with no screw holes go, inside or out?
>
>TIA
>
>Mike