

| Subject: | Re: project 2: fuel lines done, now on to fan |
| From: | Brian W. |
| Date: | Sat, 26 Aug 2006 16:58:05 -0700 |
It doesn't overheat, but I haven't really tested it in continuous stop and go traffic around town. I suppose it is possible that I am just not hearing the low speed, but I would think at least in the garage while letting it idle I could hear it up by the radiator. Any way I could test it further? Brian ----- Original Message ---- From: Kenneth Lewis <kdlewis@northstate.net> To: Brian W. <wkdrvanagon@SBCGLOBAL.NET> Sent: Saturday, August 26, 2006 7:48:59 PM Subject: Re: [VANAGON] project 2: fuel lines done, now on to fan Brian, I can just barely hear the low speed on my 86's radiator fan. Are you sure it isn't running? Does it overheat? Ken Lewis http://neksiwel.20m.com/ ----- Original Message ----- From: "Brian W." <wkdrvanagon@SBCGLOBAL.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, August 26, 2006 5:13 PM Subject: [VANAGON] project 2: fuel lines done, now on to fan > Well the fuel lines project (first project for newbie) went well, aside > from needing to pull out part of the intake to get at a sheared off bolt. > Pulling the intake was actually a lot easier than I thought it would be. > So now I can relax a little about engine fire. Thanks to everyone who > helped me out on my first project. Wouldn't ever have even attempted it > without the info and help from the list. > > But alas on to the next project. My radiator fan doesn't seem to ever > run. I know it works because it kicks on if I turn on the AC, but it > never turns on otherwise. I don't run my AC as the compressor makes quite > a rackus and it needs to be recharged (later project I suppose....geesh > one at a time). The van doesn't overheat, but it starts to climb if I am > ever in stop and go traffic. So I figured I should just get this taken > care of. From what I could read on the archives, the most logical place > to start would be the fan switch or themo switch. After that (or before > if I am wrong)...what else could be the problem? > > -Brian > 86 westy weekender > >
Have something to add on this topic today? Revive this thread in the forum »