Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Searched archives. Missing CV bolt question
From:neil
Date:Mon, 28 Aug 2006 12:32:29 -0400

Hi John.

Good tips. Thanks! Got my medium strength (removable)
Loctite ready to go!

Likely won't try wire tip. As you say tough to do OB
CV bolts.

Cheers,

Neil.

--- John Rodgers <inua@CHARTER.NET> wrote:

> I would scrounge up all those metal plates from
> somewhere and put them
> back in. Also, get new lock washers. They are
> intended for one-time use
> only.
>
> I did a safety wire routine on 68 bus one time when
> the bolts worked
> loose. Drilled throught the bolt heads sideways,
> then after installation
> and rorquing down, I put air craft safety wire
> through the bolt heads in
> a tightening direction.  Never had another bolt come
> loose  -- until my
> current van - an 88 GL. Had three bolts come loose
> after a repair. It
> was at that point I started doing my own CV work. I
> figured the mechanic
> that worked on it before didn't torque the things
> correctly. Had no
> trouble since I retorqued. I prol'ly won't saftey
> wire the 88 simply
> becasue the bolts in the trailing arms are so hard
> to get to. Use
> loctite there.
>
> John Rodgers
> 88 GL Driver
>
> neil wrote:
> > Hi all.
> >
> > *sigh*
> >
> > Am repacking CV's. After cleaning/inspecting CV
> parts
> > I found that I have only 10 metal bits (plates
> with 2
> > holes) and 20 bolts. Some washers.
> >
> > My theories:
> >
> > - PO/mechanic didn't install all the CV parts.
> >
> > - I am loosing my mind as well as Vanagon parts.
> >
> > - Neighbours took them because they didn't like
> the
> > "music" I was making pounding out drive shafts.
> >
> > or,
> >
> > - Gremlins took them from the greezy pile of bolts
> > etc. to add to their collection of single socks.
> >
> > Bentley shows Synchro as having
> bolts/washers/metal
> > pieces on front CV. Rear CV shows only bolts.
> >
> > I have 4 new boot kits ready to install.
> >
> > Given that my van had some or all of these metal
> > pieces installed, can I install with bolts only?
> >
> > It boggles my mind that the CV's could've been
> working
> > all this time minus a few bolts/washer/metal
> pieces.
> >
> > Is this possible?
> >
> > Oh and....
> >
> > All 4 CV outer rings are discolourd (sorta
> black/blue)
> > 1/2 way through from inside toward out (if that
> makes
> > sense) on each side. Are they heat damaged and in
> need
> > of replacement?
> >
> > Thanks so much for any help!
> >
> > Neil.
> >
> >
> > Neil Nicholson.
> > 1981 air cooled Westfalia.
> > Cheap-o web site:
> >
> >
>
http://www.members.shaw.ca/tubanick/welcomewesty.html
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> >
> >
> >
>

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com