

| Subject: | Re: Bosch #72137 oil filter question (have searched archives....) |
| From: | neil |
| Date: | Wed, 23 Aug 2006 16:27:32 -0400 |
Hi Jim. On second look at my notes (phone calls to FLAPS) it's not a big diff in $ between Bosch and Mann filter. (I wanted to return a part to supplier of Bosch filter so was going to "kill two birds...." and get filters while there) I can get a Mann for sure. I'll make sure they can get the right one. From what I've read it should be a: 719/12 as for Bosch, did some more searching in archives. It seems there may be a German made Bosch that *may* be acceptable, but it seems lister opinions are against Bosch. At least the newer non German version. I think I'll order in some Mann filters, it they can get the right one. Thanks for input, and if I'm off base on Mann #, TIA for any advice. Neil. --- Jim Felder <felder@knology.net> wrote: > Neil, > > Doing your own work and scrimping on oil filters is > false economy, in > my opinion. If it's not a Mann/Mahle, it won't have > the proper > valves. Neither will a Bosch. If you do end up using > a common oil > filter, don't drive any long distances. Make sure > you are using good > oil either way, and get a good filter on there as > soon as you can, > especially if you don't like the clatter of > collapsed lifters. > > I don't have a 24 mm socket and have done about > everything to a > vanagon you can do but remove the dash and the gas > tank. I can't > think of what you would need one for. If you were to > change out a > power steering rack you'd need a 22mm, and a 1 1/16 > or 1/18 socket to > pull the steering wheel nut. > > Jim > > > On Aug 23, 2006, at 2:42 PM, neil wrote: > > > Hi all. > > > > First up, sorry for asking a potentially hackneyed > > question. > > > > Am changing oil and plan on using Bosch oil filter > # > > 72137 from local Canadian supplier. (Mann/Mahle > more$, > > harder to get plus I will be purchasing affordable > CV > > boot kit available from vendor of Bosch filter) > > > > Is this the correct filter? i.e. will it have the > > proper valves? > > > > On another note... > > > > I remember reading in archives of 24 mm deep > sockets > > when researching tools. Can't find the relevant > post > > nor can I recall if I need this tool. > > > > On what would this socket be used? Do I need one > in my > > arsenal of tools? (I plan on doing most if not all > my > > own van work) > > > > Running 81' AC Westy. > > > > Thanks for any info! > > > > > > > > Neil Nicholson. > > 1981 air cooled Westfalia. > > Cheap-o web site: > > > > > http://www.members.shaw.ca/tubanick/welcomewesty.html > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > protection around > > http://mail.yahoo.com > > > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Have something to add on this topic today? Revive this thread in the forum »