

| Subject: | Re: FIRE!! How did it happen? How to fix? |
| From: | neil |
| Date: | Tue, 5 Sep 2006 19:18:43 -0400 |
> Tom Young <tomyoung1@COMCAST.NET> wrote: > Hi all: > > Well, after 30+ years of driving air-cooled Vanagons > and busses I had my > first engine fire today. Get's the old adrenaline > pumping, I tell you! > > I'm puzzled though as to why the fire started and a > couple of aspects of > the "fix-it" issue. SNIP > > The fire seems to have been concentrated right at > the rear of the air > distribution box near the cold start injector, > distributor, etc. > > Pics at > > http://home.comcast.net/~tomyoung1/Engine_compartment.jpg > http://home.comcast.net/~tomyoung1/engine_compartment_lid.jpg Hi. This is a late post, but may be of use to you. I just finished doing a complete HP FI hose replacement as well as a complete tune up. Prior to doing the work, I was rooting around getting familiar with things. i.e. moving/checking vacuum hoses etc. After doing that, I ran it. When I came back to the project, the RH (Pass side) fuel hose at cold start valve looked wet. It had sprung a leak. It was not leaking before. In your case, it looks like the same hose was possibly leaking. My point is that simply moving things around can (obviously in my case) make an old part fail. Ironically it may have been the same part. BTW, good to see pics. Nice clean engine. I think I'll put clamps on my manifold boots too! Cheers, Neil Nicholson. 1981 Air Cooled Westfalia. http://www.members.shaw.ca/tubanick __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Have something to add on this topic today? Revive this thread in the forum »