

| Subject: | Re: Vacuum leak? |
| From: | Charles McGehee |
| Date: | Wed, 6 Sep 2006 07:11:42 -0700 |
How did you find the pin hole leak in the first place? Charles '85 Westy At 02:46 PM 9/5/2006, Roger Sisler wrote: >Well your problem has sat here ,unanswererd for almost a week.I'll take a >stab at it. I am usually wrong,but the good part is that it will surely >bring out the best in listees when they tell me I am >wrong ,here,below.Maybe then they will take your issue up. I hope then you >will have the help you need.Have a safe passage over those mountians.Wish I >was there. > >I think your problem may be an exhaust leak.Basically, you are good to >proceed. I currently have an exhaust leak ,and your symptoms are similar.I >have had exhaust leaks before without symptoms of almost any kind.Indeed,I >had a leaky exhaust pipe at the #3 cylinder flange. No symptom except a tad >louder exhaust,and a failed safety inspection.The po had wired a welches >grape juice can to the flange for the fix.Like I say,no symptoms. > >My current exhaust hole,leak,is of the pin hole variety.It is after all 4 >headers come together ,and next to the oxygen sensor(1.9).It wont idle .It >stalls,backfires.has real bad drivability(whats new).I took it to a shop to >have the exhaust checked.I had to rev the engine to keep it running for the >mechanic to check it out. I sat in the van way up on the lift.A small leak >at the o2 senser was the villian(still is). I also suspect this as your >problem as you say it is getting worse.The pin hole gets bigger and the >symptoms get worse. > >I would check your exhaust carefully.You got guts to be traveling is such a >hybrid ,way out there .Once again,wish I was there. >Roger
Have something to add on this topic today? Revive this thread in the forum »