PB Blaster is great stuff - works better than liquid wrench and WD-40 (IMHO)
I've used Silicone spray to cure leaky bushings.

Every tool kit should have PBlaster and JB weld. <g>

Todd
'88 Westy.

 -------------- Original message ----------------------
From: Dave Vickery <davevickery@HOTMAIL.COM>
> Yep, worked for me too.  At least on one van.  The other one was less
> cooperative.  Maybe that's the difference btw a good, but squeaking, bushing
> and one that need replacing.
>
>
> >From: John Graham <theklube@GMAIL.COM>
> >Reply-To: John Graham <theklube@GMAIL.COM>
> >To: vanagon@GERRY.VANAGON.COM
> >Subject: Re: Squeaky front end parts
> >Date: Wed, 20 Sep 2006 09:41:07 -0400
> >
> >Report of solution!
> >
> >On the way home last night, I stopped at a NAPA store and bought a can of
> >PB
> >Blaster for a whopping $4.61.  This morning before leaving for work, I
> >simply sprayed the joints that I could easily see from outside the front
> >wheel wells and like magic, the noises have gone away!
> >
> >The points I was able to easily get were the upper control arm bushings,
> >the
> >anti-sway bar bushing and the 'link' that has the long rod that goes
> >diagonally towards the front (real technical this morning) BUT they're all
> >quiet now.  I'm happy.
> >
> >PB Blaster appears to have been developed to primarily help with removing
> >long rusted hardware, but the can does mention eliminating squeaks.  It
> >does.  Blaster has a very fine focused spray stream which helped get the
> >goods where they needed to be.
> >
> >John Graham
> >88 Westy
> >Charlotte, NC