I'm about to install the new seal on my luggage rack, and was just wondering
if there's anything I should know aside from the obvious.  There are four
screws on the front and sides of the rack, four on the back, and I assume I
remove them, remove the rack, then pull out the old seal and put on the new
one.

Is there more to it than that?  The info in the Bentley is singularly
useless - they have luggage racks and interior head panel on the same page,
with a lot of photos.  From the layout of the photos it would appear that
one has to remove the interior panel to remove the luggage rack - there's no
labeling to indicate which photos go with which instructions.

Is that actually necessary?  Do I have to remove any interior screws to get
the rack off, or just the eight exterior ones?

And is there anything else I should know before I get to it?

Oh, and right, I didn't find anything in the archives on this subject!  :-)

Joy

****************************************************************
Joy Hecht
now living in a real house in northern Virginia
and Matilda, 1989 Burgundy Vanagon
now living in the driveway and resting after two and a half years
lugging Joy and her stuff around...

For musings about life and the vanadventures:
http://www.joyhecht.net

****************************************************************