> Splice in a smaller diamiter hose someplace in the line. that
> will cut the pressure at the sink.

I did the same thing in a somewhat easier manner on my '77 Westy, by simply
using a hose clamp on the line to restrict the flow. This allowed me to
"dial it in" by loosening/tightening until I found the flow rate that I
liked. I was concerned that this might shorten the lifespan of the pump or
burn it out. However the pump was still working fine when I sold the camper
a few years later. (YMMV of course.)

- Ron Salmon
  The Bus Depot, Inc.
  www.busdepot.com
  (215)  234-VWVW

_____________________________________________
Toll-Free for Orders by PART # :  1-866-BUS-DEPOT