I use the 2.1 intake runners throttle body and the Digijet European ECU
with my big Valve 2.1
I promised Ben the Euro ECU a while ago and I will send it out tomorrow

Jim Want try one

Bob

----- Original Message -----
From: "Old Volks Home" <oldvolkshome@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, September 27, 2006 9:13 PM
Subject: Re: 1.9 and 2.1 Parts Interchangability

>I have a method to deal with the larger Throttle Body Opening in my how-to
> on my page (at least it's worked for me since 1997)..
>
> Since Jeff is gonna use the 2.1 Plenum and Runners like I did, he
> shouldn't
> have a problem.
> --
> Jim Thompson
> 84 Westfalia 2.1 "Ole Putt"
> 73 K Ghia Coupe "Denise"
> 72 411 Station Wagon "Pug"
> oldvolkshome@gmail.com
> http://www.oldvolkshome.com
> **********************************
> On 9/27/06, ROBERT DONALDS <donalds1@verizon.net> wrote:
>>
>> the 2.1 air center section has 2MM larger runners and 5MM larger throttle
>> body opening
>> the 1.9 boots will fit
>> The 1985 air center section  has the off set to match the 2.1 and does
>> bolt
>> up with no issues
>> have you realy bent the holders to work ?
>>
>> Bob
>>
>>
>> ----- Original Message -----
>> From: "Benny boy" <huotb@VIDEOTRON.CA>
>> To: <vanagon@GERRY.VANAGON.COM>
>> Sent: Wednesday, September 27, 2006 8:32 PM
>> Subject: Re: 1.9 and 2.1 Parts Interchangability
>>
>>
>> > The 1.9 Air plenium fit... kind of, you need to bent the small tab at
>> each
>> > end... you don't want to use a 2.1L intake!!!! not the same diameter at
>> > all!
>> >
>> > Ben
>> > http://www.benplace.com/
>