On 10/1/06, Florian Speier <groups.florian@gmail.com> wrote:
>
> Hi Zoltan,
>
> I am trying to talk about the additional seal thaat was put in in 80 and
> later vans together with the flow-through. someone is sending me pieces
> from
> his parts van and i need to instruct him where the extra seals are and how
> to get them out. so therer is a rubber and a channel part to it? the
> rubber
> just slides out and the channel is a pita to get out as jordanvw and benT
> explain?
>
> flo

Flo,

I've never found it to be a PITA to remove because in each situation I was
also removing the door. I only used a socket with long extension. That's it.
I added these seals to me 88 Doka in less than 10 minutes on each side as
the doors were also off. I actuallly did this in the absence any light other
than what my cellphone key pad could provide.

I do not recommend you remove them as Zoltan recommends as you need the
steel channel to hold the rubber strip.

--
BenT