Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: how works the westy sink pump?
From:Geo & Kathleen Hahn
Date:Mon, 9 Oct 2006 16:39:29 -0700

chris wrote:

> id like to just throw the hose that fed into the stock tank, into a
> smaller portable water tank I have handy, but the pump doesn't seem to
> be able to pull the water up from it.

It should be able to do that.

> If I place water almost level with the pump and dang near submerge the
> thing, then I can get it to pump, but its not easy.

The pump, of course, must be submerged in order to pump water.

> How did the old system work, is it (in part) gravity fed?

Nope, just a submersible pump.

> Aka, do I need to somehow attach the hose to the bottom of whatever tank
> I use and allow gravity to force the water into the pump before it will
> start to take over on its own?

Shouldn't be necessary.  I have noticed (small sample size here) that
the pump is more likely to fail if it has sat around dry for a long
time.  Mine would sieze up and I would have to pull it and work it a bit
if it sat for several months in a dry tank.  Now I leave some water in
the tank and only drain & clean when I will soon be refilling it.

Is your pump running... or just humming?  Quite a different sound with
the latter possibly indicating a seized impeller.

Geo H

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.13.1/466 - Release Date: 10/7/2006