Time!
Wait an hour or so to let the high lifters bleed down. The hard ones are the
good ones.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Zoltan
Sent: Friday, October 20, 2006 1:40 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: valve lash adjustment question

What to do when the lifters are pumped up too hard to take the one or two
full turn and only allow zero turn.  Is not there something to do with the
release valve?
Zoltan
----- Original Message -----
From: "Sam Johnson" <wrey45@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, October 20, 2006 9:48 AM
Subject: Re: valve lash adjustment question

> Here is some information that will be of much use in your adjustments.
>
> http://www.ratwell.com/technical/HydraulicLifters.html
>
> Sam
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.4/476 - Release Date:
> 2006.10.14.
>
>