you need to remove the pistons in order to separate the case. The case must
have some hardware left in place or you would be able to separate the seam
4 bolts inside the water jacket on the pass side would be my guess

Bob

----- Original Message -----
From: "roger sisler" <rogersisler2000@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, October 23, 2006 4:14 PM
Subject: How do you split the case?

> Got this 1.9 case.I have removed all the nuts and bolts that are around
> the seam.Cant split the two halves.The heads are removed ,but the pistons
> and liners are still intact. I want the crank out of it.I hit the case
> with a mammer,but no dice, or split case.How do I do it?
>
> ---------------------------------
> Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great
> rates starting at 1�/min.
>