por15 is my choice.
works very well with there entire rustproofing system.
thumbs up.

dylan

----- Original Message ----
From: robertmstewart <robertmstewart@MAC.COM>
To: vanagon@GERRY.VANAGON.COM
Sent: Saturday, November 4, 2006 11:38:31 PM
Subject: Re: Seam Sealant  - What Brand is best? What is the best

I recently used seam sealant all over my van, worked great but I used the
Napa brand and it never set up to harden so be sure to use the 3M brand and
use it at the proper temperature. When I used the stuff I think it was about
10 degrees below it's recommended temp.

Be sure to tape off seam area, this stuff gets really messy, it must be
worked with very quickly before it sets up.

I too used some clear sealant on certain areas on the van and has worked
great.

on 9/27/06 12:14 PM, JordanVw@AOL.COM at JordanVw@AOL.COM wrote:

> In a message dated 9/27/06 9:56:52 AM Eastern Daylight Time,
> clint_kolda@YAHOO.COM writes:
>
>
>> Are there any clear sealants on the market that could be used to repair
>> cracked OEM sealant?  I don't have rust, but I would like to repair a couple
>> of
>> seams that have cracks in the sealant.  I would like to avoid painting
>
> yep.. 3M makes some..  and you can always use clear silicone caulk if you
> want..since youre not painting over it, it wont matter.
> chris