Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Seam Sealant - What Brand is best? What is the best
From:Roger Sisler
Date:Sun, 5 Nov 2006 14:22:50 -0500
To use POR seam sealer, best to  prep the seams,first.Gouge,and sand out
all calk and look at the inside.Probably some rust is showing. Use POR 15
marine clean and metal ready for best adheasion. I would use a spray gun
w/air compressor, to force the marine clean and metal ready into the seam.
From both sides. Then use the sealer.Finally ,just gotto cross your
fingers.