Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Replace Hydraulic lifters with solid lifters?
From:neil
Date:Thu, 9 Nov 2006 18:30:20 -0500

Hi all.

Did some reading in archives about lifters (found
Boston Bobs tech pages. Good stuff!) and gleaned info
that may help.

Here's what's happening:

van sits unstarted for more than a week, a pretty
noisy lifter happens. It happened before, the noise
went away and it may do so this time too, but upon
taking it on highway for short (1 km) boot, noise
didn't go away. In fact I lost power for a short bit.
(valves not opening properly I'm sure). Noise happens
through entire RPM range. Oil must be draining out of
lifter and isn't coming up to pressure, so too much
clearance in valve train. Blah blah blah....

Can I replace stock hydraulic lifters with solid ones?
Is this a bad idea?

Are solid lifters even available for the air cooled 2
litre?

My theory is that since I don't drive it every week, I
could eliminate this problem. But hey; maybe I could
just start it every few days..... ;^)

Cheers and TIA,

Neil Nicholson.
1981 Air Cooled Westfalia.

http://web.mac.com/tubaneil

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Have something to add on this topic today? Revive this thread in the forum »