you need to clear the air inlet tube. That hole near the knob is the air inlet. Make there are no spider webs or other debris inside. Remove the burner and clean under neat. Make sure you aren't blocking the inlet with a magnetic card or button or some such.

Dennis

----- Original Message -----
From: gary hradek
Date: Monday, November 27, 2006 2:23 am
Subject: problem with one of the two stove burners
To: vanagon@GERRY.VANAGON.COM

> Over thanksgiving (in yosemite) the right burner on
> the stove was burning rich. You can clearly hear
> from the hiss of gas, that the flow is greater on the
> right side burner which burns with a yellow flame.
> The left side looks blue and works great. Do I need
> to replace the valve on the right side or is this
> something that can be repaired. thanks gary
>
>
>
>
> ____________________________________________________________________________________
> Cheap talk?
> Check out Yahoo! Messenger's low PC-to-Phone call rates.
> http://voice.yahoo.com
>