I haven't done this, Steven, but if you look at Frank Condelli's
installation ... the propex doesn't reside entirely within the usable
area of that cabinet.  It appears that he modified the partition so that
it comes down to the top of the propex so it actually resides partly in
a previously inaccessible area.  Granted, some storage space is lost,
but not as much as in other locations.

Mike

 > What do you mean?  You just said you put the heater
 > in the "cabinet space" next to the water tank.
 > Why isn't that usable space?  I tuck plenty of
 > stuff in there.
 >
 > That's why I think this solution isn't any better
 > than putting the unit under the bench.  Same net
 > amount of space removed from your overall space
 > total.  The only other solution I've read is the
 > removal of the rear auxilary heater unit which
 > I think is a pretty good idea unless you live
 > in conditions where you need that extra heater.
 > IMHO it is not worth relocating the circuit
 > breaker or giving up that cubby hole versus the
 > ease of installing the unit under the bench seat.
 > The only thing I can see that is of benefit is
 > the shorter copper tubing route to the main
 > tube.
 >
 > Just my point of view.  Sorry if it comes out'
 > gruff....  :)
 >
 > Steven
 > '91 Westy (with Propex under the bench seat since
 >            1997)