Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: was: co/propane RE: propex
From:Tom
Date:Wed, 29 Nov 2006 12:25:39 -0700

On Nov 29, 2006, at 11:59 AM, Mark Drillock wrote:

> I think Tom is asking about the vertical partition that walls off
> the wiring and water tank stuff from the lower storage area.

Yes.
>
> It is just held in by a few screws and can be put right back. It
> creates some protected space for the wiring and water tank hoses
> but in a wasteful manner as far a space goes. I attached flexible
> plastic shields to protect the vital bits and allow me to SEE how
> much water is in the tank. Then I added water to an empty tank in 2
> gal increments and marked the shield area with a line for each
> increment. For shield material I used the paper thin flexible
> disposable cutting "boards" sold these days, cut as needed and
> screwed into the cabinet.

Cool!
>
>
> Some years and models differ in what is down in that area. I like
> to remove the partition for more storage space and so I can see the
> water level in the tank when the need arises.

84 Westy-will it work on that earlier model?

TIA,

Tom B.
>
> Mark
>
>
>
> Bob Stevens wrote:
>> " Is this something that has to be hacked, or is it returnable to
>> stock?"
>> Tom, in my van, the separator/partition between the upper and
>> lower storage
>> areas is an easily removable shelf. Even has a hole in it so you
>> can just
>> put your finger in it and pull it up and out. It is not a
>> "secured" shelf.
>> Bob Stevens
>> '87 Westy Syncro
>> "Passion Fruit"