i'm planning on removing the bellhousing, and only media-blasting
that, and the parts bob so graciously sent. the rest of the
transmission, and the engine, i will be deplaquing with my whizzer
(air-powered die-grinder), and a few scotch-brite pads.

sudhir
p.s. yay for oxford commas.

On 12/25/06, aatransaxle <daryl@aatransaxle.com> wrote:
> Sudhir...be carefull about getting sand or grit into the seal areas..Had a
> customer go at his trans after a rebuild and I had to take it apart and
> clean it afterwards to get the grit out...Daryl of AA Trans
>
>  corridor have a
> > media-blaster I would be able to use, borrow, rent or steal?
> > I can reimburse you for the media.
> >
> > I can get most of the transmission case and engine mount with my 3m
> > scotch-brite disks, but there are some places on both that the disks
> > cannot access.
> >
>
>
>