Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: LED lighting
From:trooz
Date:Fri, 22 Dec 2006 11:59:00 -0800

I stuck one over the rear seat to the a/c housing to use as a reading light.
It worked fine, but the stickum doesn't like whatever that surface material
is and kept falling off until, as you experienced, it was full of dog hair
and who knows what.  I'm a tad reluctant to epoxy anything there, or drill a
hole for the mounting screw.  Other than that, I agree; they're great little
lights.

Bob Trousdale
'90 Westy

I was on a photo shoot with a photographer a month or so ago. We were in
Alabama's Talledega National Forest in my westy for three days.
The first thing that happened is that one of those puck lights rolled out of
the rear hatch unnoticed and got stepped on by a camping boot.
It wouldn't turn off. It was on for all three days! It was still on for the
fourth day when I got back. I took it apart and used the handle of a knife
to smooth out the dents in the aluminum housing and the switch functioned
again. The sticky stuff on the back had enough dirt and grit on it that it
wouldn't hang anymore, so I epoxied a magnet to it and now it's my westy's
sliding door interior light.

I figured that anything that tenacious was worth saving. The ones with
stickum make great westy cabinet lights, BTW.

Jim

On Dec 22, 2006, at 9:29 AM, Paul Guzyk wrote:

> Earlier this week I bought a package of 3 LED "puck lights" at Costco
> for $15 US with batteries.  These ones are a little bigger, about 3.5"
> in diameter and grey in color.  They use 3 AAA batteries each.
>
> The Costco ones come with stick on Velcro and screw mounts, have two
> brightness settings, and are pivotable so you can aim them better than
> the "DotIt" style.  I agree with Nathaniel, a few of these units and
> you have plenty of light for camping--and with LED's, the batteries
> last a long time.
>

Have something to add on this topic today? Revive this thread in the forum »