A broken muffler bracket can generate a lot of private email, that's for sure!!

Since getting a new muffler with the improved brackets hasn't been
offered yet, I'm thinking that a shade tree approach will have to do
until it warms up outside later in the Spring.  I'm thinking of
crafting an 1/8" thick piece of angle iron just enough longer than
the height of the square muffler so as to be able to drill a hole in
each end that would have two pieces of all thread or 2 long bolts to
clamp the muffler  to the engine hanger mounts on the one side and
than have either a flat bar or another piece of angle iron up against
the rear vertical surface of the muffler to create some sort of cage
bracket and after careful tightening of the threads, maybe that will
hold things in place until it warms up outside and I get a chance to
remove everything and fix it properly.  This repair should be able to
be implemented without removing the muffler from the van.

Anyone interested in a used Stebro Vanagon muffler after it gets it's
"new and improved" brackets welded into place?  Eventually it will go
on ebay if things don't take a change for the better here
shortly.  What's a used one worth out there?

DM&FS

At 02:18 PM 12/30/2006, Max Wellhouse wrote:

>Frank/Dan/Other Listees:
>
>I guess lifetime guarantee means different things to different
>people. I have no idea how long my passenger side bracket has been
>totally separated from the muffler, but it was just last week that my
>son discovered it while crawling under the van for some unrelated reason.
>
>
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.409 / Virus Database: 268.16.0/610 - Release Date: 12/30/2006

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.16.2/613 - Release Date: 1/1/2007