It will only need adjusting after it is initially tampered with.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Kenneth Lewis
Sent: Thursday, January 11, 2007 6:27 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Soak Idle valve in carb. cleaner ...

Zoltan,
Just spraying it with carb cleaner. The connecter end has an opening between
the contacts which, unbeknownst to most, you can access an adjustment screw.
First remove a set screw with a 1.5mm allen(if memory serves me) then use a
1mm to adjust. If you pull back the rubber boot the adjustment is possible
with the engine running.
Ken Lewis
http://neksiwel.20m.com/