This is the little piece at the end of the shaft, about a fingers
width below the end. The gear rides on the bottom of the little piece
when the gear is extended.

Rob
becida@comcast.net

At  1/28/2007 11:27 AM, Mike Collum wrote:
>If you're asking what I think you are, there's a cap at the end held
>by 2 screws.  Remove that cap and you'll see the end of the
>shaft.  There should be a washer and U shaped retainer which should
>just slide off with that cap removed.
>
>Mike
>
>
>
>Rob wrote:
>>I'm trying to take a starter (for an 86) apart.
>>Any advice on the little snap ring that holds the small bushing (?)
>>on the end of the shaft, the one you have to get off to take
>>everything apart?
>>
>>Rob
>>becida@comcast.net