

| Subject: | Re: reinstalling gas tank |
| From: | TC |
| Date: | Sun, 4 Feb 2007 10:32:11 -0800 |
out vw tech service dept here uses Wurth Rubber Care (Aerosol) http://www.properautocare.com/wurucaa.html http://www.wurthusa.com/project/en/leftnavi/products/chemical/chemical.html > Maybe not 'any oil or grease' is good in this case. While a lot of the > rubber on our car can withstand oil, I don't see a reason why they would > have designed the rubber oil proof on the gas tank. Gas proof yes. > I use WD40 that is not oily but lets things slide until it evaporates, which > is a long time. > I would not like to see the rubber disintegrate after a year of the change. > One can use Silicon too, I guess. > Zoltan > ----- Original Message ----- > From: "Frank Condelli" <RAlanen@AOL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Sunday, February 04, 2007 4:02 AM > Subject: Re: reinstalling gas tank > > > > In a message dated 03/02/2007 11:05:47 P.M. Eastern Standard Time, > > LISTSERV@GERRY.VANAGON.COM writes: > > > > just dropped the gas tank and put the reseal kit in, and while there, > > exchanged the long radiator and heater lines. put it back together again, > > but really have the following problem: > > > > I installed the grommets in the tank, the crossover tube to the chassis, > > mounted up the tank, then pushed the crossover pipe connectors through > > the > > grommets. this was really hard, i was reaching in through the side > > wheelwell > > over the frame. I got those two in, but the third one, the overflow from > > the > > filler tube, I cannot push in as it is not a t piece and therefore harder > > to > > push in at this angle (harder to get a grip.) > > any trick and tip what to do here? is it easier to put the grommet on the > > line and then push the grommet in with the line? any tools of help? > > thanks > > > > > > > > > > > > > > Flo, bet your trying to put them in dry. I coat the joint with Krown > > Rust > > proofing Oil before trying to push the nipples in the grommets. I > > suppose > > any type of oil or grease would work as well. > > > > Cheers, > > > > Frank Condelli > > Almonte, Ontario, Canada > > '87 Westy, '90 Carat, '87 Wolfsburg (Forsale) & Lionel Trains > > (_Collection > > for sale_ (http://members.aol.com/Fkc43/trainsal.htm) ) > > Vanagon/Vanagon Westfalia Service in the Ottawa Valley > > _Frank Condelli & Associates_ > > (http://members.aol.com/Fkc43/busindex.html) > > _Vanagon Stainless Steel Exhaust Systems_ > > (http://members.aol.com/Fkc43/stebro.htm) > > _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper > > camping event, Almonte, ON, June 07 ~ 10, 2007 > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.410 / Virus Database: 268.17.18/662 - Release Date: > > 2007.01.31. > > > >
Have something to add on this topic today? Revive this thread in the forum »