In a message dated 04/02/2007 4:50:05 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

Ok no  opinion here perhaps the .ca's on the list know of canadian  retailer/
wholesaleers
where you can get
-thermal protection split  tube's
-4 fi connectors
frank or ben ??
I also want to take those 6  engine ground wires & combine them inside the
split tube & have  just one heavy guage
wire make a single ground spot on the engine encased  in the conduit
I am semi experiened with wring but i want to make it looks  like real pro
job
so what type of connector would you use to combine all  the 6 engine ground
wires from the harness
in side the conduit to 1  heaver guage wire that you tie to the engine block

TC,  I have gotten some thermal split loom from NAPA made by GROTE but seems
it is  not available in all sizes.  I would try getting in touch with GROTE
directly.  Or going to _McMaster-Carr_ (http://www.mcmaster.com/)   and
ordering it from  them, they should have it.  As for the electrical joint you want to
make, I  would solder that kind of connection and use heat shrink to cover it
then burry  it in the split loom.  BTW, I think what your trying to do here
is to be  commended.  Keep us all posted to your progress with this project.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy, '90 Carat, '87 Wolfsburg  (Forsale) & Lionel Trains (_Collection
for  sale_ (http://members.aol.com/Fkc43/trainsal.htm) )
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
_Vanagon  Stainless Steel Exhaust Systems_
(http://members.aol.com/Fkc43/stebro.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 07 ~ 10,  2007