Actually Frank, it was rivets in later years (if not all years).

On Feb 6, 2007, at 6:17 AM, Frank Condelli wrote:

> In a message dated 05/02/2007 9:54:12 A.M. Eastern Standard Time,
> LISTSERV@GERRY.VANAGON.COM writes:
>
> I got  a  question.
>
> How does the gas Pedal fasten to the floor on the  "heel" end. Mine
> came
> loose and I don't see how it attaches. The heel end  of the pedal
> has two
> holes in it, but I don't see any hardware.
>
> Any  ideas?
>
>
>
>
>
>
> Another "Common" Vanagon  problem !  Your gas pedal "was" attached
> to the
> floor with two sheet metal  screws that have rusted away into
> oblivion.  Now what
> you have to do is  first check how badly rusted the floor is where the
> connection point was and  repair that.  Then, you can screw the
> pedal back into
> place with STAINLESS  STEEL machine screws using large diameter SS
> washers both
> sides to  distribute the load and nylock SS nuts to keep everything
> in place for
> another  100 years.
>
> Cheers,
>
> Frank  Condelli
> Almonte, Ontario, Canada
> '87 Westy, '90 Carat, '87 Wolfsburg  (Forsale) & Lionel Trains
> (_Collection
> for  sale_ (http://members.aol.com/Fkc43/trainsal.htm) )
> Vanagon/Vanagon Westfalia Service in the Ottawa Valley
> _Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/
> busindex.html)
> _Vanagon  Stainless Steel Exhaust Systems_
> (http://members.aol.com/Fkc43/stebro.htm)
> _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
> camping event, Almonte, ON, June 07 ~ 10,  2007