Mike,

Harbor Freight has a fuel pressure test kit on sale now for less than
$10.   I got it a couple of days ago and tested my system - OK.  It is
very simple and  takes just a few minutes.

Someone posted recently about making one from a tire pressure gauge -
the type with a several inch rubber hose on a round gauge and others
have explained DIY gauges in the past.  Only one saved files on this
though.  Search "fuel pressure gauge"  not "fuel pressure measurement
device" as I'll almost guarantee that it won't return anything but these
recent posts.

More expensive gauges can be found elsewhere.  You don't need much.

--
Sam Walters

Baltimore, MD

Fuel Pressure Gauge - Mark Keller

Hi Marc,

An excellant fuel pressure guage can be made by looking in the yellow
pages for companies that make up hydraulic hose or welding supplies.
 Our town's hose shop has guages for less than $10.  Get a foot or so
of  high pressure hose while your there, 5/16 or  7mm I think, double
check, This hose slides over the bleeder screw/ hose barb tee fitting in
the fuel line. It's located near the distributor base,

Anyway, also get a brass tee female thread.  The three ports are: one
for the guage, one for the hose barb, and one for a schraeder valve, its
to bleed air out of theline, and is the same thing as a air valve in a
tire.  NOTE to ensure safe practices  when you are burping the guage,
and are disconnecting after testing.

Mark Keller
91 Carat