Looking at all the things changed and having no positive results, I guess,
looking at the fact of having the bumps causing it, I would look at
changing, even if temporarily, the ignition switch.
Zoltan
----- Original Message -----
From: "Robert Rountree" <syncro87@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, March 22, 2007 7:41 PM
Subject: Problems on the road

> Problems on the road
>
> 87 syncro westy
>
> I've traveled over 4000km after just having my 2.1 rebuilt with new AMC
> heads, clutch, exhaust  etc.
> I'm in Santa Fe and I have been getting stumbling but ONLY on bumps.
> I've tried all the usual things, temp2, AFM,(I have the capacitor fix) 02
> sensor, all wiring..gnds...squeezed the whole wiring harness looking for
> inside bad connections, I've put in 2 new relays (fuel pump & power in the
> little box above the NEW coil)..I've use fuel drier, a new fuel
> filter...I'm
> going to try removing the pump and cleaning out the tank side hose
> next....
> any Ideas on what would short or cause stumbling on BUMPS... are really
> needed..
> Thank you
> RR
>
> _________________________________________________________________
> RealLiveMoms: Share your experience with Real Live Moms just like you
> http://www.reallivemoms.ca/
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.17/730 - Release Date: 3/22/2007
> 7:44 AM
>