Hello list:

After all the posts lately about fuel hose and hose replacement, I understand
why now, and here is why!

I went to start my '87 this morning and it wouldn't start and run! It would
start and die then I started smelling a strong older of fuel. I got out and
beside the right rear of the bus I had a BIG puddle of fuel and it was dripping
from the underside of the vehicle. The small hose that comes in from the
plastic line had come off the plastic line because it was all cracked from age. I
put a new piece on and all is well!

Now, I bought some 1/4 inch ID plastic air brake tubing as it is surpose to
handle the 110 lb pressure better then the rubber hose. Is their any reason
that I should not use this plastic tubing? I plan to replace all the hoses with
it. It only cost 3.36 for 12 feet which is a little more then I figure I will
need and new hose clamps as well.

Thanks for any information in advance.

Chris Snyder   </HTML>