In a message dated 25/04/2007 7:38:37 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

My Lock  on the passenger side 'flip out' window (the triangular beast) is
not  aligned correctly.  It only goes down to a 45 degree angle (and  locks
there) instead of the 90 degree angle on the drivers side.  Any  ideas on
how to straighten this out?

Gregor, remove the drift  pin from the handle.  Then unscrew the part that
the handle was connect to  on the inside from the part on the outside of the
window just enough so  that you can rotate the inner piece so that when you
reinstall the handle it  will be in it proper position.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy, '90 Carat, '87 Wolfsburg  (Forsale) & Lionel Trains (_Collection
for sale_ (http://members.aol.com/Fkc43/trainsal.htm) )_ Frank Condelli &
Associates_ (http://members.aol.com/Fkc43/busindex.html)  - Vanagon/Vanagon
Westfalia Service in the Ottawa Valley_ Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/stebro.htm)  _  BusFusion_
(http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper camping event, Almonte, ON, June 07 ~ 10,
2007