

| Subject: | Re: Dieing problem driving me nuts |
| From: | Jake de Villiers |
| Date: | Sat, 28 Apr 2007 10:57:05 -0700 |
Replace the ignition switch. You don't even need to do the hard part now, just pop off the steering column cover and pull the connector. Plug in the new switch and drive over some bumps. Jake PS I'm very sorry for your loss Gregor; Go Canucks! On 4/28/07, Gregor Brandt <gbrandt@marionette.ca> wrote: > > ;86 Westy > > Ok, I've spent the entire week on this. Tomorrow I have to drive > from Winnipeg back to Calgary and I don't know if I will make it. I > believe I have two problems...and I can't find either one. > > Problem 1 > Van hesitates at cruising speed or very light throttle. Just a small > surge, almost like lugging the engine in too high a gear. > -Changed fuel filters > -visually inspected fuel system > > > Problem 2 > When driving over bumps, or sometimes by itself, the van tach will > drop to zero. Obviously this is an electrical problem. > -Checked every wire I could get my hands on, wiggled them while > the > engine was running, from the ignition switch to the distributor. I > cannot make the problem occur by myself > -redid all the grounds I could get my hands on. Ran through the > van with an Ohm meter...resistance is zero or near zero in all cases > > > What do I do next? Besides slice my wrists and be done with the > problem :-) > > Thanks > Gregor > -- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" www.crescentbeachguitar.com
Have something to add on this topic today? Revive this thread in the forum »