In a message dated 25/05/2007 8:23:47 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

I am  going to do some painting tomarrow with por 15. Any tips? this will be
my  first time.

Follow the POR-15  instructions.  Get all flakey rust off.  Clean with the
Marine Clean,  rinse with water and dry.  Etch with the Metal Ready, 15 ~ 30
minutes,  rinse with water and dry.  Apply POR-15, two light coats.  Second coat
when first tacks up.  Watch for runs & drips.  The more humidity  in the
atmosphere the quicker the POR-15 will dry.  WEAR PROTECTIVE GLOVES  !  Clean-up
with lacquer thinner, cheaper than the POR-15 solvent.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy, '90 Carat, '87 Wolfsburg  (Forsale) & Lionel Trains (_Collection
for sale_ (http://members.aol.com/Fkc43/trainsal.htm) )_ Frank Condelli &
Associates_ (http://members.aol.com/Fkc43/busindex.html)  - Vanagon/Vanagon
Westfalia Service in the Ottawa Valley_ Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/stebro.htm)  _  BusFusion_
(http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper camping event, Almonte, ON, June 07 ~ 10,
2007