>I've got an 87 Syncro and I've decided to replace the PS rack and all
>the front end bushings since I gotta take everything apart anyway.
>I'm also doing the lower ball joints, having just done the uppers.
>
>Questions:
>
>---Anyone rented a FLAPS ball joint and bushing kit before and can
>recommend one?
>---any other special tools I might need for the PS rack and any other
>part of the suspension?

Jeff, I have not done my Syncro lower ball joints yet, but I'm told
they are easier than the 2WD (steering knuckle has less funky angles
than 2WD, generic flaps press should work well).

Don't use a pickle fork if you intend to re-use your tie rod ends.
Use the appropriate rental/loaner tool to break the joint.  (check
with Shucks/Autozone/Kragen/Crappy Tire etc)

Below are notes from my 80-84 ball joint experience...
http://californiavan.com/frontend/80-84lowerballjoints/