The system runs at 36 psi or so - try 50 psi?

Did you check for fuel flow when cranking?

On 7/16/07, Don Spence <dkspence@telus.net> wrote:
>
> HI JAKEGas flowed freely from the tank to filter hose when I replaced the
> square filter.  I have a compressor so can try blowing through the line
> between the pump and the engine compartment.
>
>  Any one suggest a suitable air pressure to do so??
>
>
>
>
> On 16-Jul-07, at 4:14 PM, Automatic digest processor wrote:
>
> Date:    Mon, 16 Jul 2007 12:59:30 -0700
>
> From:    Jake de Villiers <crescentbeachguitar@GMAIL.COM>
>
> Subject: Re: No Start 83.5: Fuel pump test?
>
>
> I think it only pumps when cranking - there's no signal to the pump
>
> otherwise.  It should be pouring out.
>
>
> A pressure gauge would be best Don.
>
>
> Have you tried blowing back through the lines?  Say pump to tank and motor
>
> to pump?
>
>
> On
>
>
>

--
Jake
1984 Vanagon GL
1986 Westy Weekender "Dixie"
www.crescentbeachguitar.com