

| Subject: | Re: RATS!! All that work, now Dometic won't cool on LP |
| From: | neil N |
| Date: | Sun, 29 Jul 2007 12:16:17 -0700 |
Oh c'mon! Not even for "back up" purposes? I'd drink it.... if I ran out of real coffee! Neil. On 7/29/07, Jake de Villiers <crescentbeachguitar@gmail.com> wrote: > No!! > > > On 7/29/07, neil N <musomuso@gmail.com> wrote: > > Good idea. > > > > Especially for 44 year old eyes! > > > > We all keep instant coffe in our Westies no? --- ;^) > > > > Neil. > > > > On 7/29/07, Mark Drillock <drillock@earthlink.net > wrote: > > > You don't need a gauge, just some clear plastic tubing. > > > > > > With at least a 4 foot section of tubing bent into a U shape, pour water > > > into one end until the bottom of the U has water coming up about a foot > > > on each side. Then connect the other end of the tubing to the propane > > > source. Slowly turn on the propane and the pressure will cause the water > > > to go lower in one side of the U and higher in the other side. Measure > > > the height difference between the water level in the 2 sides. The > > > difference is supposed to be 11". > > > > > > You need to have a tiny bleed hole on the section of hose connected to > > > the propane. I use a finishing nail or some such to punch a hole. The > > > hole should let the water level return to the same on both sides when > > > the propane is turned back off. Make sure this happens or the reading > > > will not be accurate when the gas is on. > > > > > > It does not matter how close the legs of the U are together. All that > > > matters is that you can measure the height difference with respect to > > > level ground. > > > > > > Adding tea or coffee to darken the water first will help you see the > > > level better. > > > > > > Mark > > > > > > neil N wrote: > > > > > > > Hi Mark. > > > > > > > > Checked the net for a Marshall web presence, but none, so can't find > > > > specs of what I used. > > > > > > > > Used the LP tank and Marshall reg ( "Marshall 605H LP Gas" ... "Model > > > > 150" ) from my Weber BBQ. > > > > > > > > Don't know what pressure it puts out as I can't measure pressure. (no > gauges) > > > > > > > > Does one need some kind of inline gauge to read pressure? > > > > > > > > Flame looked quite health via viewer at inside bottom of fridge, > > > > though that doesn't mean too much. > > > > > > > > > > > > > > > > On 7/29/07, Mark Drillock < drillock@earthlink.net> wrote: > > > > > > > >>What regulator is on the BBQ tank and have you measured the actual > > > >>propane pressure seen by fridge while the cooling was bad? > > > >> > > > >>Mark > > > >> > > > > > > > > > > > > > -- > > Neil Nicholson. 1981 Air Cooled Westfalia. > > > > http://web.mac.com/tubaneil > > > > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > www.crescentbeachguitar.com -- Neil Nicholson. 1981 Air Cooled Westfalia. http://web.mac.com/tubaneil
Have something to add on this topic today? Revive this thread in the forum »