

| Subject: | Re: Fuel pump issues. |
| From: | Jim Akiba |
| Date: | Mon, 6 Aug 2007 12:08:05 -0400 |
If it's .01 ohms from pump ground to batt ground, it doesn't look like the ground. jump a power wire to the positive, leave the negative and see if she runs. Jim Akiba On 8/6/07, craig cowan <phishman068@gmail.com> wrote: > > I checked the resistance between the negative (ground) therminal on the > fuel > pump and the negative terminal on the battery and got 0.01ohms of > resistance. > > I also tried replacing both relays (temporarily) and that did not fix the > problem. BUT i was able to get the car to start and run perfectly, and > start > over and over for a few minutes, then it returned to its state of death. > > I have not yet run a new ground wire to the engine (from the fuel pump) > but > its looking dismal as that being the problem. > > -Craig > '85GL > > > On 8/6/07, Jeff Lincoln <magikvw@gmail.com> wrote: > > > > Craig - > > > > I can't speak as an authority but I wired my pump backwards once as well > - > > it did not hurt the pump. As a matter of fact that pump is still running > > strong. YMMV > > > > > > On 8/4/07, craig cowan <phishman068@gmail.com> wrote: > > > > > > Ok. SO i'm checking out the fuel pump, as it seems to account for the > > > car > > > not starting. I had a mechanic help me check the relays by jumping > them > > > and > > > he says they seem to be working right and that it just seemed to be a > > > bad > > > pump. SO, i put in my spare pump (i think its brand new). Well it > seems > > > i > > > wired it backwards because no one ever taught me that on European > cars, > > > BLACK does NOT mean NEGATIVE and they tell me the ground wire should > be > > > on > > > negative and the black wire on positive. So, i switched it, and the > car > > > still doesnt start. Maybe i damaged the pump? Can these get destroyed > by > > > > > > running backwards? If so, i just killed two fuel pumps. > > > > > > I rigged up a voltmeter to the fuel pump that could be watched from > the > > > drivers seat while turning the key. With the key in the first position > > > (auxillary) i get only 0.3 Volts to the fuel pump and it does NOT kick > > > over. > > > When i'm turning the engine over, it gets 9.5 Volts. It seems that > this > > > is > > > drastically wrong. Any input would be greatly appreciated. > > > > > > -Craig > > > '85GL > > > > > > > > > > > -- > > Thanks, > > > > Jeff > > 90' Carat (Grover) > > 86' (We call this one Parts) > > 85' GL (Preparing for reanimation) >
Have something to add on this topic today? Revive this thread in the forum »