I realize this is a little late but in that I just took my grease caps
off today I thought I'd share how I did it this time.

I used a standard claw hammer and levered against the lug bolts in a
roundy roundy fashion.  They came off with no hassle and no special tools.

Mike

Stephen Grisanti wrote:
> I could not reach the archives.
>
> Inspection is due this month so I'm checking the front
> brakes and I have pads if I need them, but it looks
> like the rotors could stand to be turned or replaced
> if I'm putting new pads on.  Not having the
> Bentley-advised VW 637/2 tool, how do normal humans
> get the grease cap off?  Nothing I tried worked.
>
> Of course, when they installed the wheels last time
> they tightened the lugs enough to require me to break
> out the old Triumph motorcycle fork tube cheater bar I
> keep in the basement.  Glad I discovered this before a
> flat caught me away from home.
>
> By chance, my neighbor was installing new struts on
> his early '90s Nissan Maxima and I found the nice 15X7
> alloy wheel bolts right on (front at least), though it
> looks like the front bolts could stand to be about
> 1/4-3/8" longer for safe engagement.
>
> While I'm at it, if you have helpful hints for the
> rear brakes, speak now.  Thanks!
>
> Stephen
>
>
>
>
> ____________________________________________________________________________________
> Yahoo! oneSearch: Finally, mobile search
> that gives answers, not web links.
> http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
>