In a message dated 26/08/2007 1:56:00 P.M. Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

This is  a question for those of you that have installed a Surepower 1315
battery  seperator.  Has anyone found a good way to cover/protect the
terminals  on top where the two batteries connect?  They are out in the open
and  depending on where you mount the 1315 can be very exposed to  being
shorted.  So I'm wondering what solutions people have come up  with to
protect those terminals.

Loren,  I have installed many of these and never added any cover, never seen
a problem  so far.  I ALWAYS install them in the battery box with the AUX
battery.  In the forward RH corner under the ledge.  Well protected  there.  You
will need to cut one foot off the 1315 to get as close to the  wall as
possible to allow a group 41 battery to fit.  With an Optima  battery you do not need
to cut the foot off.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://members.aol.com/Fkc43/trainsal.htm) )
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
- Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://members.aol.com/Fkc43/stebro.htm)
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 07 ~ 10,  2007