

| Subject: | Re: Cooling questions still |
| From: | Stephen DeMocko |
| Date: | Mon, 17 Sep 2007 10:13:34 -0700 |
Ed,
I think Ken is right about the combustion gasses leaking into the
cooling. That is what mine was doing. How does the list feel about
retorqing the heads if the outer coolant seal is not leaking? I know
there is a chance of displacing the sealant under the head fasteners,
but it would be easier than pulling the heads all the way off to replace
the copper ring.
Stephen DeMocko
('85 Westy Luci)
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Kenneth Lewis
Sent: Monday, September 17, 2007 8:54 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Cooling questions still
Ed,
The internal head gasket may be leaking combustion gasses into the
cooling
system. Do you notice a steady stream of bubbles into the reservoir(the
tank
with the blue pressure cap)? The water pump could be shot. The
thermostat
stuck, radiator clogged(does it get hot?). Does the radiator fan work on
all
speeds?
Ken Lewis
http://neksiwel.20m.com/Have something to add on this topic today? Revive this thread in the forum »