I found this article at the gowesty site very helpful:
http://gowesty.com/library_article.php?id=314

You don't need to remove the entire panel, just the
area towards the rear.  Remove the rear vent on the
door if you have one (two screws I think) and then
gently pull on the panel - you can use a putty knife
or similar to find the panel clips, that pull out
easily once you get a feel for it.

If you are going to do these sorts of projects you
really should buy the Bentley workshop manual, I find
it very helpful for understanding how things are put
together, so I can take them apart.

Good luck

--- Kai Mei <kai@NEWCLEAR.US> wrote:

> Hi all,
>
> a. how do you remove the door panel?
>
> b. The drivers door won't lock (even when closed)
> AND the slider
> won't unlock... the actuator (or spring?) keeps
> locking the door
> right after you unlock or move the unlock tab up
> from the inside.
> Perhaps incidentally, the passeger door does not see
> to activate or
> respond to any actuators.
>
> Anyone familiar with this failure mode? It was
> working well, then not
> working and then working and now I have no way of
> locking the door, a
> bad idea here in brooklyn, ny.
>

____________________________________________________________________________________
Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545433