

| Subject: | Re: Which Wheels |
| From: | Scott Daniel - Shazam |
| Date: | Wed, 26 Sep 2007 18:12:02 -0700 |
Alloy wheels always are slightly better for .. Less unsprung weight, Sometimes more offset that gives you a slightly wider track, which is slightly better for cornering stability. And they are a half inch wider and may help provide more tire stability. I'd say up to a 10 % improvement overall in vehicle dynamics, maybe 15 %. You 'll notice all performance/modern cars have alloy wheels. Steel wheels are easier to deal with for getting tires mounted and balanced, Less attractive from a theft viewpoint, And generally cheap and durable. I'd run the factory alloys over aftermarket ones generally - they are true 14 inch factory alloy wheels specifically designed for vanagons. Scott www.turbovans.com now...if I could just find a good deal on 5 decent 15 inch vanagon wheels...( I got the good tires - Aggilles ) and not Audi or Passat ones with too much offset, and not 140 bucks each new, and not heavy like the Rhein alloy 15 inch vanagon wheels. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Todd Last Sent: Wednesday, September 26, 2007 5:37 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Which Wheels I'd vote for keeping both sets. Use the steel wheels for a set of good winter tires, and the alloys for some nice summer tires. (Since it looks like you live somewhere that would see snow or wet winters.) Given average driving, I don't think you are going to subject either wheel to enough distress to have any problems. I'd say the tires you are running will make more of a difference than the wheels. You did not say how much wider the alloys are or their offset. There is a possibility that they might add some small degree of stability - again depending on the tires you are running. Todd '88 Westy Interesting that your pop-top has no opening vent - I thought they all had one. (I can see the cut-out for it.) -------------- Original message ---------------------- From: Jonathan Poole <jfpoolio@GMAIL.COM> > I am having trouble making a decision between two sets of wheels. One > option is a set of BBS alloys that I have had sitting around for a few years > and the other option is a set of stock alloys. Both are 14" although the > alloys run wider tires (205s are on them now). I thought that I was a steel > wheel purists and have never even mounted the bbs wheels but when I put the > alloys on my old van in preparation to sell it I have decided that I like > the way they look. Currently I am thinking that steel is more reliable > and/or easier to fix and that the stock tire width will perform better and > am therefore probably not going to keep the alloys, but maybe it is time for > a change? What does the collective wisdom of the list have to say? Any > obvious reasons to go either way that I am overlooking? Any flaws in my two > reasons stay with steel? > > Photos of the two wheel sets can be found here: > > http://poolio.net/index.php?option=com_content&task=view&id=13&Itemid=26 > > <http://poolio.net/index.php?option=com_content&task=view&id=13&Itemid=26> > > Thanks > > Jonathan Poole > '82 AC Westy's
Have something to add on this topic today? Revive this thread in the forum »