If you look at the thermostat housing you will see a blue sensor
sticking out of the left side.  This is for the fuel injection so ignore
it.  If you look on the side of the thermostat housing that is facing
toward the front of the van you should see the temp sensor for the gauge
there.  You know what it looks like because you have a new one (little
brass thing with a small post coming out of the middle).  Hope this helps.

Ken Wilford
John 3:16
www.vanagain.com

Michael Vickey wrote:
> My coolant gauge quit working (intermittently) on my 90 Syncro Camper.
>
> Red LED works as it should, but no reading on the gauge.
>
> I have a new sender here in my parts box, but can't find where it goes.
>
> Bentley says red/yellow wire and a brown (ground) wire goes to it, but I can't trace the wire past the T7a connector.
>
> Anyone know where the sender goes?
>
> Thanks.
>
> Michael J
> http://www.velocity.net/~vickrail/moshevw.htm
>
>