The short one listed is 76mm so the 97mm should be right.

Mark

Bob Donalds wrote:

> the automatic stud is shorter than the std trany stud
> 97 MM sounds short
> Bob
>
>
> ----- Original Message -----
> From: "Old Volks Home" <oldvolkshome@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Tuesday, October 23, 2007 9:43 AM
> Subject: Re: Need the two lower studs that secure the transmission to the
> engine - No P# in ETKA
>
>
>> Chris -
>>
>> Actually, these should be studs:
>> VW # N0146752 - 10 x 97mm
>> Illustration 3-10, Key #43
>