Are you sure you have the correct elbow hose. Yes the two elbow hoses are
different. The small ends are different diameters. The large one is for
the pipe going to the t-stat housing.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Reinhard Vehring
Sent: Saturday, October 27, 2007 6:22 PM
To: vanagon@GERRY.VANAGON.COM
Subject: coolant leak oil cooler to water pump

Dear listees,
has anyone found a good solution for the connection
from the oil cooler to the top of the water pump? My
syncro engine has a hose elbow, a section of metal
tube and another straight hose section there. Pretty
complicated, four clamps, hardly accessible right next
to the exhaust. I can't get the connection of the
elbow to the pipe to stop leaking. I already have new
hoses, cleaned the tube, put spring clamps on. Still
leaking. I guess being so close to the exhaust gives
it a pretty high heat load. Any good solutions to
this? Or am I missing something simple here? I would
like to put something in plave that is absolutely
bullet-proof. I don't like coolant leaks out in the
woods.

Reinhard

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com