Jerry,

Was MT90 a typo?

John

On 11/3/07, Gerald Masar <azsun99@earthlink.net> wrote:
> Another problem.
> This is on a '88 Westy with AT. Sometime back, I drained the oil from the final drive,
> carefully cleaned the old gasket off, the cover and mating surface and replaced the
> cover with a new gasket ($30+), new, slightly longer bolts and lock washers. I
> CAREFULLY torqued it according to the instructions in Bentley. I refilled with Redline
> MT90.
> I cannot get it to stop leaking. It wouldn't be so bad if it was just leaking on the
> floor, but it is being picked up by the spinning torque converter and flung out the
> holes in the top, all over the wiring, etc. on both sides of the firewall above. Any
> suggestions to stop the leak?
> As always, thanks,
> Jerry
>

--
John Meeks

'91 Multivan, '85 GL bits
Northern Michigan
KC8ZFN

Vanagon Rescue Squad
http://www.vanagonauts.com/Vanagon_Rescue_Squad74.htm