No, not sure, and now you have sown the seeds of doubt, despair and despondency :).
Looking back, there has never been any oil on the ground below the final drive,
occasionally, a little further back, the exhaust pipe bracket at the front of the
engine is wet, as is the housing around the TC.
Well, some quick research indicates replacing the TC seal is not something I want to
do at home. I will know more after I replace the final drive pan, using the Right
Stuff, and refilling with GL-5 gear oil.
Thanks,
Jerry

----- Original Message -----
From: "aatransaxle" <daryl@aatransaxle.com>
To: "Gerald Masar" <azsun99@EARTHLINK.NET>; <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, November 04, 2007 11:07 AM
Subject: Re: Re: final drive cover leaking

> And are you sure the oil being slung around is fromt the pan gasket???
> Torque convertor seal possibly??
> Daryl of AA Transaxle
> (425) 788-4070
> aatransaxle.com
> ----- Original Message -----
> From: "Gerald Masar" <azsun99@EARTHLINK.NET>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Sunday, November 04, 2007 9:10 AM
> Subject: Re: final drive cover leaking
>
>
> > Thanks for the replies.
> > Guess I'll drain it, clean it up, replace cover with "the Right Stuff" and
> > refill with
> > regular GL-5 or 6 gear oil.
> > Jerry
> >
> > ----- Original Message -----
> > From: "Dennis Haynes" <d23haynes57@HOTMAIL.COM>
> > To: <vanagon@GERRY.VANAGON.COM>
> > Sent: Saturday, November 03, 2007 9:22 PM
> > Subject: Re: final drive cover leaking
> >
> >
> >> Forget the gasket and use the "Right Stuff". Once the cover is bent from
> >> the original cork gasket, they do not seal well with the new style fiber.
> >> The "Right Stuff" will make that leak stop.
> >>
> >> Also, you do not want MT90 here. No Syncros or shifting stuff. You want a
> >> GL-5 or GL-6 extreme pressure gear lube.
> >>
> >> Dennis
> >>
> >>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.21/1109 - Release Date: 11/4/07 11:05 AM
>
>